Categories
- Dry Process Cement Production Line
- Tube Mill
- Rotary Kiln
- Vertical Mill
- Rotary dryer
- Cooler
- Exhaust Gas Cleaning Equipment
- Suspension Preheater
- Stacker Reclaimer
- Air Locking Valve
- Bag Filter
- Bag Loader
- Bulk Loader
- Butterfly Valves
- Company news
- Conveyor and Feeder
- Discharge Gate
- Discharging Equipment
- Homogenizing Silo
- Industry news
- News
- Other Valves
- Roller Press
Contact Us
Address:Haitian International, East Street, Haian County, Jiangsu Province, China
Tel: +86-513-88820117
Fax: +86-513-88812117
E-mail:csmmachine@163.com
Author Archives: mzcddj
Raw Material Distributor
Raw material distributor is applied to material distribution in the middle part of transport equipment and at on the top of the silo. There is 2-spout, 6-spout and 8-spout production according to the requirement of the production process and the slopes of spout can be chosen from between 6 ° and 14 °. Continue reading
Inspecting Door at side of Homogenizing silo
Inspecting door at side of homogenizing silo is composed of outer door and interior door. It is made with advanced carbon steel, so it is solid, durable, superior sealing, convenient opening and easy to be used for the examination in silo. Continue reading
Rotary Air Distributor
Principle of rotary air distributor is that the pressed air obtained from air blow-machine firstly is distributed to each outlet orifice via circumrotating of the valve core and then sent to every even area (with aerating box) through pipeline. The way of recycle in the even area makes the powder material homogenization further. Continue reading
MF Raw Material Homogenizing Silo
When storied raw material reaches to an appropriate altitude, aerate and fix from adjusting valve, sampling, testing in turn, then correcting and fixing again until the compositions of raw material is qualified. Characteristics of clearance homogenizes silo are the flexible deployment and operations and good homogenizing effects. Continue reading
High temperature engine-saving gate
High temperature engine-saving gate is welded with super strength steel, stainless steel and perfect carbon steel. It is a kind of heat-retaining material which is double structure, and is anti flaming. Besides it has the characters of heat-resistant, engine-saving, perfect structure, smart on-off and easy operation. Continue reading
Electric high temperature adjusting gate NCV Type
Electric high temperature adjusting gate NCV Type is used with CYCLO or electric actuator, it control and adjust the material in the high temperature pipeline in chemical, metallurgy, building materials and some other industries. Continue reading
Butterfly Valve Type YDDB (flue damper)
Flue damper adopted single axis and no lining structure, the damper and valve plate all made of Q235—A stainless steel and valve bear is made of 2CrI3 hardened and temoered steel. When the temperature is over 350°C~500°C. The damper can be designed as square, top circle bottom square according to customer’s demand to meet different dampers’ requirement.Manual actuator is attached (when diameter is less than 900mm, hand wheel is attached), and at the same time a 0~90 indicator card is installed to show the open rang of the valve plate. Continue reading
High Temperature Butterfly Valve
This high temperature has lining in valve body, valve plant and seat all made of 0Cr25Ni20 stainless steel, and valve bear is made of Cr18Ni9Ti stainless steel which is high strength, wear-resisting and anticorrosion. It has air hole in structure which is in favor of working in order and reduced the dust, avoid jam to ensure the smart on and off. Continue reading